Description

Product range:

20mm to 400mm for Pipes & 20mm to 250mm for Fittings

Standard: IS 4985 for Pipes and IS 7834 for Fittings

Applications:

In agriculture

• Water supply and distribution schemes Irrigation

Others

• Drinking Water supply and distribution
• Cable ducting
• Ventilation pipeline
• Slurry lines

Jointing method:

Solvent Joint

Cut the pipes of required length and clean the end.

• Chamfer the edge of the pipe for easy entry.
• Mark the depth of insertion on pipe end. o Roughen the pipe insertion surface (externally) & socket of the fitting (internally) by using emery paper.
• Apply a thin coat of Prince PVC solvent cement on the roughened surface with brush. Avoid excess solvent cement.
• Insert the pipe end inside socket fitting fully and turn through 90° for even spreading of solvent cement. Hold the joint for about 1 minute.
• Cure the joint for 24hrs for a proper and permanent leak-proof joint.

Threaded Joint

• Clean the male and female threads.
• Apply teflon tape on male thereads in the direction of the thread tightening. Tighten the threads firmly with hands. Tighten the joint slightly more using pipe wrench. Do not over-tighten.
• Use rubber packing while applying wrench to avoid scratches on the pipe.

 Major advantages:

1.Lightweight, easy to transport, store, handle and install. Saves labour.

2.Corrosion resistance, UPVC is rustproof material therefore bore diameter remains constant,    ensuring constant flow over a lifetime.

3.Smooth bore ensures higher flow compared to GI pipes and fittings of the same size. No clogging. Saves operational cost.

4.Long working life (if operated under normal/recommended working conditions).

5.Solvent cement joint therefore quick installation.

6.Cost effective. Added value for your money.