Dr. Fixit helps to reducing Heat, and increase Energy Saving mode. it is coating composed of acrylic emulsion polymers, microspheres, properly selected & graded inert fillers, light fast & weather durable white pigments, additives & water as medium. It is used as a heat insulating coating on building rooftops & exterior walls because it helps in reducing power consumption substantially by reducing the load on air-conditioners & keeps the interiors cool with additional function of waterproofing.
PROPERTIES | SPECIFICATION | RESULTS |
Brush ability | - | No sag, slip & run off |
Solid content, % | ASTM D 1644 | 55-60 |
Specific Gravity | - | 0.99 – 1.05 |
Elongation at break % | ASTM D-412 | > 500 |
Water Resistant | ASTM D-870 | No blistering and re-emulsification |
Film thickness | - | 700-750 micron in two coats |
Peel adhesion to concrete N / mm2 | ASTM D | 1.5 |
Water vapour permeability | IS : 7809 / 1977 | 0-5 gm/sqm. 24 hrs. (Full cured in 24 hrs.) |
Water absorption (%) | ASTM D-642 | 0.02 |
Crack Bridging | ASTM C836: 00 | No crack at 2 mm gap |
Hardness, Shore A | ASTM D2240: 91 | > 50 |
Water Penetration @ 3 bar | DIN 1048: Pt 5: 91 | DIN 1048: Pt 5: 91 |